The Material: Stone Aged for Millions of Years
Sourced from premium underground rock strata, granite undergoes natural aging over millions of years, resulting in exceptional dimensional stability, fine crystalline structure, and extreme hardness. Even when subjected to heavy impacts during use, these tools may only lose a few granules of stone, and they remain unaffected by routine temperature fluctuations.
As a non-metallic material, granite V-blocks exhibit no magnetic response and resist plastic deformation. Consequently, they maintain exceptional dimensional stability. Furthermore, granite V-blocks outperform precision measurement reference components made from high-grade cast iron or steel, delivering superior and consistent accuracy.
Frequently Asked Questions
Why is granite the preferred material for precision measurement?
Compared to cast iron, granite offers the following advantages:
- Excellent stability: extremely low internal stress, minimal deformation over extended periods.
- High hardness: superior wear resistance, resistant to scratches.
- Corrosion resistance: unaffected by cutting fluids, oil, or rust.
- Non-magnetic: suitable for measuring magnetic materials without magnetic field interference.
- Low thermal expansion coefficient: minimally affected by temperature fluctuations.
What environmental conditions are required when using a granite V-block?
Precision measurement is highly sensitive to environmental factors:
- Temperature: standard measurement temperature is 20°C. Significant temperature variations cause thermal expansion/contraction, affecting accuracy.
- Humidity: maintain dry conditions. While granite does not rust, excessive humidity may cause workpiece corrosion or surface condensation on the V-block.
- Vibration: install on a stable foundation, away from vibration sources like punch presses or forging equipment.
- Light exposure: avoid direct sunlight to prevent localized thermal deformation.
How should minor burrs or scratches on the surface be addressed?
- Minor burrs: gently remove using a natural oilstone (e.g., Arkansas oilstone) dipped in oil. Do not apply excessive force.
- Deep scratches or pits: do not attempt DIY repair. Contact the manufacturer for professional grinding restoration or recalibration. If located in non-working areas (edges), temporarily avoid using those sections.
What is the calibration cycle?
- General recommendation: calibrate annually.
- High-frequency use: calibrate every 6 months.
- Special circumstances: immediately recalibrate if the V-block is impacted, relocated, or exhibits abnormal measurement fluctuations.
What is the service life of a granite V-block?
- With proper use and maintenance, the physical lifespan of a granite V-block can exceed 10 years or longer.
- Its “accuracy lifespan” depends on usage frequency and maintenance. In laboratory environments a V-block may hold its precision for years, but under harsh workshop conditions it may require restoration within 1–2 years.