Home >Product

GMC2013 — Big Envelope. Stone-Calm Structure

A dual-drive gantry machining center on a 12-tonne monolithic mineral casting base.

The GMC2013 brings the structural advantages of mineral casting to large-format machining: a one-piece epoxy-granite base and crossbeam, dual synchronised gantry drives, and closed-loop Fagor linear scale feedback across the full 2,000 mm X travel. For moulds, aerospace structures, EV battery trays and large precision plates, it delivers heavy-cutting capacity with the surface quality of a much smaller machine.

2,000 × 1,300 × 600mm travel X / Y / Z
3,000 kgmaximum table load
48 Hzfirst structural natural frequency (FEM modal analysis)
0.021 mmtool-point displacement under 3,000 N cutting load (FEM)

Structure: Mineral Casting at Full Scale

The GMC2013’s base — a single mineral casting of ≈ 12 tonnes — integrates the work-table foundation, coolant and chip channels, anchor system and leveling elements in one pour. The gantry crossbeam is likewise a mineral casting structure with cast-in steel guideway inserts, ground after curing. No weld seams, no bolted frame joints, no thermal stress from a foundry: the structure is stress-free from the day it is cast.

At this scale the material advantages compound: damping up to 10× cast iron suppresses the low-frequency gantry modes that limit heavy cuts; thermal conductivity of ≈ 1/20 of cast iron means a 2-metre structure that barely breathes with the shop’s day-night cycle.

Finite Element Analysis: Stiffness Where the Cut Happens

Gantry machines are only as stiff as their worst position — so the GMC2013 was analysed with the spindle head at mid-span and full Z extension, the weakest configuration in the envelope.

1. Static stiffness — 3,000 N cutting load at the tool point

Load case (worst position) Tool-point displacement (FEM)
3,000 N in X (side milling) 0.021 mm
3,000 N in Y (face milling) 0.017 mm
3,000 N in Z (plunge / drilling thrust) 0.011 mm
Table sag under 3,000 kg centred load 0.009 mm

2. Modal analysis

Mode Natural frequency Mode shape
1st 48 Hz Gantry sway in X
2nd 57 Hz Crossbeam bending
3rd 71 Hz Gantry torsion
4th 89 Hz Column / saddle local mode

Dual-drive synchronisation control plus the frame’s high material damping keep the first gantry mode from being excited in normal roughing and finishing envelopes.

3. Thermal simulation

With a 1 K vertical temperature gradient across the structure, simulated tool-point drift is ≤ 0.008 mm; over a ±3 K daily ambient cycle, ≤ 0.012 mm — before any software compensation. Linear-scale feedback closes the remaining growth out of the position loop entirely.

Conclusion: FEM verification at the worst position in the envelope confirms the GMC2013’s structure is never the limiting factor — not in heavy roughing, not in long finishing passes.

Motion & Control

Technical Specifications

Parameter GMC2013
Travel X / Y / Z 2,000 / 1,300 / 600 mm
Work table 2,100 × 1,200 mm, T-slots, max. load 3,000 kg
Structure Mineral casting monolithic base (≈ 12 t) + mineral casting crossbeam, cast-in steel inserts
Gantry drive Dual synchronised AC servo, C5 ball screws (linear-motor X optional)
Feedback Fagor linear scales, all axes
Rapid traverse / cutting feed 20 m/min / up to 10 m/min
Positioning accuracy ±0.010 mm full travel (±0.006 mm with error mapping)
Repeatability ±0.005 mm
Spindle BT50, 15 kW, 6,000 rpm (optional 12,000 rpm)
Tool magazine 24 tools (optional 40)
Controller Fagor 8065 / Siemens 828D (customer choice)
Machine weight ≈ 18,500 kg
Applications Mould & die, aerospace structures, EV battery trays, large plates, rail and energy components
—— LET'S COLLABORATE BUILD PRECISION INTO YOUR NEXT PROJECT

Share your application, drawing or dimensional requirements with our team.

Request a Quote →
Request a QuoteTell Us What You're Building

Export-grade crating and partner logistics keep heavy precision parts safe across North America, Europe and Asia-Pacific.

  • √Engineering response within 1 business day
  • √Standard plates from 7 days · custom builds from 20 days
  • √Drawings in STEP, DWG or PDF — NDA on request
  • √Prefer email? Write to info@bostar-motioncore.com
Get Your Quotation

Three fields is all it takes to start.