Chatter is the sound of a machine fighting its own frame. Our mineral casting frames damp vibration at the source — up to ten times the damping of cast iron — so tools cut cleanly, surfaces finish finer, and the machine holds its geometry through the shift.

Cast the frame, don’t weld it. A mineral casting frame is poured in one piece with all functional features — inserts, channels, mounting faces — already in place, then machined on its datum surfaces.
10× damping vs. cast iron · Ra 0.8 µm surface finish (design target) · 2,000 × 1,300 mm (79 × 51 in) gantry travel
Gantry machining center — European machine tool builder
A gantry mill builder’s 2,000 mm machine chattered on finish passes in aluminum, forcing slow feeds and extra polishing. We supplied a one-piece mineral casting gantry frame with a granite table reference surface. Surface finish improved from Ra 1.6 µm to Ra 0.8 µm on the same program, and feed rates rose 25% (design targets).
Illustrative result (design target). Customer name withheld; replace with a verified reference before publish.
Send your drawing or requirements to discuss a granite or mineral casting component.
Request a Quote